Front suport

We send 3 supports and small pieces of wood. Sometimes there is a piece with a 45 degree cut, this piece goes on the bottom.

** SCREWS

Use 1-1/4" screws to attach the small pieces to the sides

Another option

If you want to make it professional, you can join two supports as shown in the photo and make it stronger.

** Warning

This takes up space and you must be careful that your fan motor can enter later.

Front cover

You have to sand the sides and put a lot of glue on it, then to put the covers on you need to use nails or screws, 
Then you can hide the nails with putty or bondo. 

**Bondo:

we recommend bondo for wood:

3M Bondo Wood Filler 30 oz.
You can apply this on the bottom. 

 **Putty:
we recommend

Glazing and Spot Putty, 4.5-oz. It is red.